Infinite Peripherals SCOM-100 Manuale Utente Pagina 28

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 27
SCOM-100, User guide 28
The output LED 2 will switch on and you will hear the
relay contact switch to a closed state.
Now repeat the set/reset procedure of the last two
examples. You will receive messages with a reverse
behaviour of the output LED and relay contact. E.g. after
a ‘SET’ command, the LED goes off and the relay contact
switches to the open state and opposite.
An output configured as a closed contact can be
reconfigured to an open contact using the ‘Clear DO
configuration’ command (see 4.4.8) or using the opposite
configuration command.
Configure output as an open contact:
1070,m,n
1071: Command ID
m: Module number (0 for SCOM-100 main
unit, 1-8 for DI-42 I/O expansion units)
n: Output number (1-4 for SCOM-100
main unit, 1-2 for DI-42 I/O expansion
units)
4.4.4 Pulse digital output
A digital output set with a pulse behaves as shown on the
time-based diagram below.
Vedere la pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 74 75

Commenti su questo manuale

Nessun commento